基于废陶瓷的多孔陶瓷研制及其对Ni2+的吸附性能

通过SEM、XRD、FT-IR表征及多孔陶瓷对废水中镍的去除能力,确定多孔陶瓷的制备条件:原料中田菁粉掺杂质量分数为4%,焙烧温度为800℃.SEM和孔结构表征说明,焙烧使多孔陶瓷形貌、结构发生变化;随着焙烧温度的升高,多孔陶瓷的比表面积和孔容呈现降低的趋势,而孔径呈现增大的趋势;EDS分析能表明,原废瓷粉和多孔陶瓷的主要元素组成均为Si、Al、O.SEM、XRD和FT-IR分析表明,多孔陶瓷吸附前后结构稳定.吸附Ni2+的系列实验表明,多孔陶瓷用量为10 g·L-1,吸附时间为60 min,进水pH值为6.32,进水Ni2+浓度在100 mg.L-1以内.在此条件下废水的Ni2+去除率可达89.7%,多孔陶瓷对废水中镍有较好的去除效果.以制备的多孔陶瓷处理含镍废水,考察多孔陶瓷对废水中Ni2+的吸附动力学和吸附等温线,结果表明,多孔陶瓷对Ni2+的吸附过程符合准二阶动力学模型(R2=0.999 9),Qe为9.09 mg·g-1;吸附过程可用Freundlich方程和Langmuir方程来描述,温度由20℃升高至40℃,最大吸附量Qm由14.49 mg·g-1上升至15.38 mg·g-1.     

Effect of particle size on CO adsorption and thermodynamic analysis

The liquid nitrogen adsorption method was used to characterize the pore structure of non-cohesive coal in the 061,404 working face of the Lingxin coal mine. The amount of specific surface area of micropores in the sample continuously rose as particle sizes reduced. The volumetric method was used to measure the CO isothermal adsorption curves of three samples (sample I, 0.425–0.25 mm, sample II, 0.18–0.25 mm, and sample III, 0.15–0.18 mm). The experimental results were fitted by the Langmuir model. According to the experimental results, it was conducive to CO adsorption with the conditions of high pressure and low-temperature. The decrease in grain diameter increased the number and volume of micropores in the sample, which improved the adsorption capacity of the sample. In addition, according to the adsorption data, the CO adsorption thermodynamics of three samples were analyzed, including surface potential (Ω), Gibbs free energy change (ΔG) and entropy change (ΔS). The results demonstrated that CO adsorption by coal was a spontaneous process. Sample III has the most substantial adsorption capacity, whereas the sample I has the weakest adsorption capacity.     

Structural equation model of the influence of noise annoyance on miners’ unsafe behavior in coal mines

Miners' unsafe behavior (UB) is the main cause of coal mine accidents. Previous research has suggested that excessive noise in tunnels impacts miners' temperaments and safe production behavior. To explore the influence of noise on UB, four different dimensions of noise annoyance were identified: cognitive, emotional, communication, and physical mechanism annoyance. The coal mine noise annoyance scale, miners' unsafe behavior intention (UBI) scale, and miners’ UB scale were developed according to different dimensions. In the first survey, a total of 200 questionnaires were distributed in the two coal mines, and 193 valid questionnaires were recovered. Exploratory factor analysis was conducted, and invalid items were removed according to the analysis results to form the final scale. Then, 500 final scales were distributed in two Chinese coal mines, and 482 valid questionnaires were collected. Confirmatory factor analysis was conducted by collating the data of the second questionnaire. Based upon the structural equation model (SEM), the SEM of the influence of noise annoyance degree on UB and the path analysis with latent variable path analysis with the latent variables (PA-LVs) mediating model of the effect of UBI on UB were established, and the path coefficients with fitting data of the model were analyzed. The results indicated that the four dimensions of coal mine noise annoyance had a strong positive impact on UB, which was reduced by less noise annoyance. In addition, the Bootstrap method was used to verify the mediating method among the four dimensions of noise annoyance, cognitive annoyance, emotional annoyance, with communication annoyance indirectly affecting UB through UBI. The research results provide theoretical support for reducing the UB of miners and improving coal mine safety levels.     

考虑公众选择偏好的应急避难安置双阶段选址-分配模型*

为使开放避难场所符合公众自行避难的实际情况,借鉴Huff模型量化公众选择行为,构建双阶段选址-分配模型,第1阶段确定开放避难场所位置,第2阶段将溢出容量的灾民二次分配到有剩余容量的避难场所,并利用改进粒子群算法进行求解。研究结果表明:双阶段选址-分配模型能够实现同一需求点灾民前往不同避难场所的过程,管理者干预政策能够使服务人数大幅度增加,避免资源浪费、灾民流离失所且二次分配情况主要依赖于第1阶段的结果。研究结果可为管理部门规划应急避难场所提供参考。     

智能手机应用程序使用与操作的驾驶分心风险影响研究*

为研究智能手机应用程序操作方式与使用行为对驾驶分心影响的问题,探讨智能手机程序操作方式对驾驶分心影响的优劣关系,基于结构方程模型提出4个因果关系假设,构建涵盖程序使用、驾驶分心、驾驶绩效等潜变量的智能手机使用行为影响的结构方程模型。通过收集线下问卷的方式进行调查,搭建模拟场景,设计6项实验方案,通过驾驶模拟实验方式收集相关数据,建立相对偏差矩阵。研究结果表明:手机通话功能的使用（路径系数0.472）对驾驶分心影响显著,手机导航功能使用（路径系数0.256）、手机音乐功能使用（路径系数0.249）对驾驶分心影响不显著。语音交互方式均优于手动操作方式,其中语音交互启动导航方式（F3=0.019）的影响最小。研究结果可对道路驾驶情况下智能手机应用使用与操作方式的研究起推动作用。     

基于缓冲区重采样的LSTM林火预测模型*

为提高林火风险预测精度,挖掘地图上隐含的空间信息、时间序列上隐含的长期趋势和循环波动,提出1种基于缓冲区重采样的长短期记忆（LSTM）林火预测模型,选取15个与林火相关的影响因素,以方差膨胀因子为评价指标对其进行多重共线性检验,方差膨胀因子大于10的因素具有共线性,并采用信息增益率验证筛选结果的合理性。考虑到火灾的空间聚集特性,采用缓冲区分析与过采样相结合方法减少样本不均衡现象的影响,最终得到176 732条样本。对12个影响因素和研究时间段的火点建立LSTM预测模型,对森林火灾发生风险进行预测。研究结果表明:基于缓冲区重采样的LSTM林火预测模型有效考虑时空上隐含的信息,预测模型准确率为87.06%,特异性为97.99%,敏感度为76.12%,阳性预测率为97.43%,阴性预测率为80.41%,ROC曲线与AUC值均优于随机森林（RF）和支持向量机（SVM）这2种基准算法。维尔克松秩和检验发现,本文提出的模型与基准算法结果具有显著性差异。研究结果可为提高林火风险预测精度提供参考。     

燃煤电厂锅炉PM2.5排放危害度评价模型建立及案例分析

为评价燃煤电厂锅炉PM2.5排放的危害度,根据颗粒的形成机制及对环境和人体健康的影响程度,将PM2.5进行了粒径分段,综合考虑不同粒径段颗粒物的质量浓度、粒数浓度、汞相对富集因子及汞元素在煤灰分中含量,建立了燃煤锅炉PM2.5排放危害度综合评价模型,最后利用已有文献现场实验测得的数据对评价模型进行了案例分析,并提出了危害度削减系数概念,可用于对除尘装置进行评价.     

Cybersecurity and dynamic operation in practice: Equipment impacts and safety guarantees

Though dynamic operation of chemical processes has been extensively explored theoretically in contexts such as economic model predictive control or even considering the potential for cyberattacks on control systems creating non-standard operating policies, important practical questions remain regarding dynamic operation. In this work, we look at two of these with particular relevance to process safety: (1) evaluating dynamic operating policies with respect to process equipment fidelity and (2) evaluating procedures for determining the parameters of an advanced control law that can promote both dynamic operation as well as safety if appropriately designed. Regarding the first topic, we utilize computational fluid dynamics and finite element analysis simulations to analyze how cyberattacks on control systems could impact a metric for stress in equipment (maximum Von Mises stress) over time. Subsequently, we develop reduced-order models showing how both a process variable and maximum Von Mises stress vary over time in response to temperature variations at the boundary of the equipment, to use in evaluating how advanced control frameworks might impact and consider the stress. We close by investigating options for obtaining parameters of an economic model predictive control design that would need to meet a variety of theoretical requirements for safety guarantees to hold. This provides insights on practical safety aspects of control theory, and also indicates relationships between control and design from a safety perspective that highlight further relationships between design and control under dynamic operation to deepen perspectives from the computational fluid dynamics and finite element analysis discussions.     

四环素光催化降解特性与选择性研究

研究了盐酸四环素的光催化降解行为,结果表明四环素光催化降解反应符合一级反应动力学方程,吸附过程为整个光催化降解的控制步骤,推断四环素的主要降解途径是吸附在二氧化钛(TiO2)表面发生光催化氧化反应.同时,通过对四环素与磺胺甲唑或阿莫西林混合样品的降解实验表明,改变pH、TiO2投加量等因素,两种抗生素的降解表现出了明显的选择性.     

AERMOD与估算模式在环境影响评价中的应用与比较

采用AERMOD和估算模式两种预测模式对同一生活垃圾填埋场进行了预测。比较两种预测结果可以看出,在污染源、预测范围、运行周期相同的情况下,敏感点处的落地浓度均与排放源强呈正比,与距离呈反比。预测结果同时说明,估算模式是一种保守的预测模式,其预测结果比AERMOD模式大,可作为进一步预测模式的有效补充。